Self-adhesive EPDM sealing strip is a kind of strip material commonly used in sealing doors and windows, automobiles, ships and other occasions. The use of this kind of sealing strip can effectively prevent substances such as water, air and dust from entering the room, and can effectively reduce energy waste.
The following is about the use of self-adhesive EPDM strip seals:
Determine where the seal needs to be installed. First of all, you need to clean the place to be installed to ensure that its surface is dry, clean and smooth.
Measure and cut the desired length of weatherstrip as needed. Use scissors or a razor blade to cut the sealing strip to an appropriate length, making sure that the length is slightly larger than where it needs to be sealed.
Peel off the protective paper from the back of the seal. While peeling off the protective paper, make sure not to let the adhesive strip stick together.
Slowly paste the sealing strip on the surfaces such as doors and windows according to the desired position. Make sure the weatherstrip is snug to the surface, especially around curved corners.
Press the seal firmly with your fingers or a scraper. Ensure the bond strength of the weather strip to the surface.
Check that the seal is secure and, if necessary, heat it with a heat gun or hair dryer to strengthen its bond.
The above is the basic method of using self-adhesive EPDM tape sealing strip. It should be noted that in order to ensure the effectiveness and life of the sealing strip, the sealing strip should be checked and replaced regularly. At the same time, when using the sealing strip, care should be taken not to stretch or bend it excessively, so as not to affect its bonding effect.
contact us
Company: Sichuan Jiayueda Building Materials Co., Ltd.
Contact: grace Lee ,gracelee@jyd-buildingmaterials.com
Aria huang, aria@jyd-buildingmaterials.com
WhatsApp: +86 173 4579 3501(grace Lee)
+86 17345793570(Aria huang)
Post time: Apr-12-2023
