Installing a weather strip can effectively prevent wind, rain and dust from entering your house or car. Here are some steps to properly install the weather strip:
Clean the surface: Before installation, please make sure the installation surface is clean, dry and free of dust, grease or other impurities. Clean the surface with detergent and a clean cloth.
Measure: Use a tape measure to measure the length and width of the installation area and record the measurements accurately. Purchase the weather strip you need based on your measurements.
Cutting the weather strip: Use scissors or a knife to cut the weather strip to the desired length. Make sure to use sharp scissors or a knife to ensure a clean and neat cut.
Installation: Peel off the back of the weather strip and stick it slowly to the installation area. Make sure it fits snugly and use your fingers or a scraper to press it into the surface to make sure it fits snugly.
Adjustment: If your weather strip needs adjustment, gently stretch or tighten it to fit the area where it will be installed. If you need to replace the weather strip, carefully peel off the old weather strip and follow the above steps again to install the new weather strip.
Completion: After installation, check that the weather strip fits properly. You can stretch the weather strip slightly to make sure it fits snugly and doesn’t fall off. Make sure to keep your weather strip clean and maintained in the future to ensure its long-lasting effect.
Overall, installing a weather strip is not difficult, but requires patience and care. Following the steps above, you can easily install the weather strip to your house or car to protect your house or car from wind, rain and dust.
contact us
Company: Sichuan Jiayueda Building Materials Co., Ltd.
Contact: grace Lee ,gracelee@jyd-buildingmaterials.com
Aria huang, aria@jyd-buildingmaterials.com
WhatsApp: +86 173 4579 3501(grace Lee)
+86 17345793570(Aria huang)
Post time: Apr-07-2023
